801 RACING - PRODUCT INFORMATION
Call to order 1-855-722-3801
PULSE provides an immediate measurable increase in horsepower in gasoline, diesel and methanol
powered engines. PULSE has consistently demonstrated increased overall performance, providing
smoother cold starts, increased throttle response and less knock under load. In addition to increased power
and performance, PULSE works to remove hard carbon deposits and reduce engine maintenance costs.
Questions and Answers about Pulse
Q. What type of fuel can Pulse be used in?
A. PUSLE can be used in all hydrocarbon fuel blends. These include gasoline, diesel, methanol, E85 and all fuel blends. When applied to methanol, it should be applied several hours before the methanol is used to ensure it is completely dissolved.
Q. How long does PULSE take to dissolve in fuel?
A. PULSE begins dissolving immediately and typically dissolves within minutes. Temperature of the fuel and agitation will affect the total time necessary to completely dissolve PULSE. You can add PULSE to your tank at any time, but for quickest dissolution add PULSE to your tank immediately before fueling. When using PULSE in race fuels, it is recommended to add PULSE to the fuel the day before you race.
Q. Does PULSE change the octane levels of fuel?
A. PULSE does not change octane levels or any other fuel specifications.
Q. Can PULSE clog a fuel filter?
A. PULSE dissolves 100% in the fuel and will not clog a fuel filter.
Q. Will using PULSE void my engine warranty?
A. PULSE will not void an engine warranty because it does not change any fuel specifications.
Q. Does adding more than the recommended dosage of PULSE provide even greater power gains?
A. Not significantly. Always use PULSE in accordance with the recommended dosage.
Q. Will adding PULSE to my fuel harm my engine?
A. No. Using PULSE in accordance with the recommended dosage will never harm your engine.
Q. Will adding more than the recommended dosage of PULSE harm my engine?
A. No, however for best results always use the recommended dosage.
Q. Can I add PULSE to a fuel tank with less than 15 gallons?
A. One dose of PULSE will treat any amount of fuel up to 15 gallons. This means that it can be used in one gallon or five gallons up to 15 gallons with each treatment.
Q. What if my fuel tank holds more than 15 gallons?
A. Use two PULSE treatments for any amount of fuel between 15 gallons up to 30 gallons.
Q. How much horsepower will my engine gain by using PULSE?
A. It depends. There are many outside variables that affect horsepower like humidity, air temperature, altitude, emission controls, fuel, engine timing and other factors. The only way to determine your horsepower gains will be to dyno your car before and after treatment with PULSE. Refer to graph on front for examples.
Q. Can I store PULSE in my car?
A. PULSE is safe to store in your car but it will melt in temperatures higher than 140 F. Do not store in direct sunlight.
Q. How often should I use PULSE?
A. For best results use PULSE every time you fill your tank. Consistent use of PULSE will help to clean and maintain optimal performance of the combustion chamber.
Q. After I begin using PULSE, how soon will I notice a difference in performance?
A. PULSE begins working immediately and with most vehicles the performance will be recognized right away. For immediate results, some vehicles may require a manual reset to the vehicle’s computer before a change in performance will be recognized. A reset can be achieved by simply disconnecting and then reconnecting the batteries(s) in the vehicle. As PULSE works to clean the combustion chamber, it may take several tanks of fuel to achieve maximum performance.